Jk Audio Remotemix X4 4 Channel Field Mixer Small
JK Audio's RMx4 combines a four-channel field mixer with a four-channel headphone amplifier, The RMx4 is perfect for small press, hotel conferences, DNG, sports, interviews, live remote and news, and can be used as a front-end mixer for your POTS, ISDN, IP or smart phone codec.Four low noise, high headroom active balanced mic inputs feature extremely high common mode rejection for outstanding cable noise immunity, and a high-Pass filter removes room rumble and mic handling noise. A soft limiter prevents overdriving the full-duplex headset interface, while the master XLR and 3.5 mm outputs are pre-limiter (full range), along with a direct drive DC coupled XLR output for improved output cable noise immunity.3.5 mm send and receive jacks for recording or playing back of recorded material. Separate headphone level and source selection controls for each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix.Phantom power is not always needed, yet it can really drain batteries. The phantom power generator only runs if any of the rear panel 48 V switches are set to “ON” position. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 VAC desktop style power supply(included)overrides the battery power only - when the supply is actually providing power. If the power goes out, the batteries automatically cut in. Separate compartments for hot swapping batteries.Its rugged design allows for field use, and runs for up to 10 hours on two hot-swappable 9-volt batteries. The unit has XLR out with a ¼” return to headphones and four ¼” headphone outputs, along with 3.5 mm TRRS which provides 2-way IFB audio from your cell phone or notebook.JK Audio RMx4 Features:Four low noise, high headroom XLR mic jacksMic/Line Switches on channels 3 & 4Individually switchable 48v Phantom Power120 Hz Low Cut FilterMaster XLR output 20 Hz – 20 kHzFour ¼” headphone jacks with individual sourceselector and level controls.¼” Headphone Cue InputPhone headset interface with 3.5 mm TRRS plug3.5 mm Send and Receive jacksLED VU MeterHot swappable dual 9 volt batteries100-240 VAC External AC power supplyCompliance tested for North America, CE markets, andAustralia.Made in USAJK Audio RMx4 Specifications:Inputs:Microphones (4): Female XLR - mic level = 2k ohm (-25 dBu nom.) Channel 3 & 4 have -40 dB Mic/Line pad switch Line level = 50k ohms, +20 dBu max.Phantom Power: 48 VDC with 6.8k ohm supply resistanceLine Input: 3.5mm Stereo line input, 20k ohms -10 dBu nom.Headphone Cue In: 1/4" mono, 20k ohms, -10 dBu nom.Outputs:Balanced Out: Male XLR 50 ohms +16 dBu max. 20 Hz - 20 kHz +/-1dB, 0.04% THD @ +16 dBuLine Out: 3.5mm Stereo line output, 100 ohms -10 dBu nom.Headphones (4): 1/4" Stereo 8 ohms, 1/3 watt per channelPower: 120-240 VAC, 50-60 Hz external power supply ortwo 9 VDC batteriesSize: 9.5" x 8" x 3" (24 x 20 x 8 cm)Weight: 3.6 pounds (1.6 kg) JK Audio RMx4 Field Mixer.
Price now:
$1,339.65
Price History:
Details:Jk Audio Remotemix X4 4 Channel Field Mixer Small
JK Audio's RMx4 combines a four-channel field mixer with a four-channel headphone amplifier, The RMx4 is perfect for small press, hotel conferences, DNG, sports, interviews, live remote and news, and can be used as a front-end mixer for your POTS, ISDN, IP or smart phone codec.Four low noise, high headroom active balanced mic inputs feature extremely high common mode rejection for outstanding cable noise immunity, and a high-Pass filter removes room rumble and mic handling noise. A soft limiter prevents overdriving the full-duplex headset interface, while the master XLR and 3.5 mm outputs are pre-limiter (full range), along with a direct drive DC coupled XLR output for improved output cable noise immunity.3.5 mm send and receive jacks for recording or playing back of recorded material. Separate headphone level and source selection controls for each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix.Phantom power is not always needed, yet it can really drain batteries. The phantom power generator only runs if any of the rear panel 48 V switches are set to “ON” position. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 VAC desktop style power supply(included)overrides the battery power only - when the supply is actually providing power. If the power goes out, the batteries automatically cut in. Separate compartments for hot swapping batteries.Its rugged design allows for field use, and runs for up to 10 hours on two hot-swappable 9-volt batteries. The unit has XLR out with a ¼” return to headphones and four ¼” headphone outputs, along with 3.5 mm TRRS which provides 2-way IFB audio from your cell phone or notebook.JK Audio RMx4 Features:Four low noise, high headroom XLR mic jacksMic/Line Switches on channels 3 & 4Individually switchable 48v Phantom Power120 Hz Low Cut FilterMaster XLR output 20 Hz – 20 kHzFour ¼” headphone jacks with individual sourceselector and level controls.¼” Headphone Cue InputPhone headset interface with 3.5 mm TRRS plug3.5 mm Send and Receive jacksLED VU MeterHot swappable dual 9 volt batteries100-240 VAC External AC power supplyCompliance tested for North America, CE markets, andAustralia.Made in USAJK Audio RMx4 Specifications:Inputs:Microphones (4): Female XLR - mic level = 2k ohm (-25 dBu nom.) Channel 3 & 4 have -40 dB Mic/Line pad switch Line level = 50k ohms, +20 dBu max.Phantom Power: 48 VDC with 6.8k ohm supply resistanceLine Input: 3.5mm Stereo line input, 20k ohms -10 dBu nom.Headphone Cue In: 1/4" mono, 20k ohms, -10 dBu nom.Outputs:Balanced Out: Male XLR 50 ohms +16 dBu max. 20 Hz - 20 kHz +/-1dB, 0.04% THD @ +16 dBuLine Out: 3.5mm Stereo line output, 100 ohms -10 dBu nom.Headphones (4): 1/4" Stereo 8 ohms, 1/3 watt per channelPower: 120-240 VAC, 50-60 Hz external power supply ortwo 9 VDC batteriesSize: 9.5" x 8" x 3" (24 x 20 x 8 cm)Weight: 3.6 pounds (1.6 kg) JK Audio RMx4 Field Mixer.
Price now:
$1,339.65
Product Description
JK Audio's RMx4 combines a four-channel field mixer with a four-channel headphone amplifier, The RMx4 is perfect for small press, hotel conferences, DNG, sports, interviews, live remote and news, and can be used as a front-end mixer for your POTS, ISDN, IP or smart phone codec.Four low noise, high headroom active balanced mic inputs feature extremely high common mode rejection for outstanding cable noise immunity, and a high-Pass filter removes room rumble and mic handling noise. A soft limiter prevents overdriving the full-duplex headset interface, while the master XLR and 3.5 mm outputs are pre-limiter (full range), along with a direct drive DC coupled XLR output for improved output cable noise immunity.3.5 mm send and receive jacks for recording or playing back of recorded material. Separate headphone level and source selection controls for each headphone output. Monitor just the clean mixer output, or the Cue input plus the mix.Phantom power is not always needed, yet it can really drain batteries. The phantom power generator only runs if any of the rear panel 48 V switches are set to “ON” position. Low noise, low power ICs are used throughout to preserve battery life. The 100-240 VAC desktop style power supply(included)overrides the battery power only - when the supply is actually providing power. If the power goes out, the batteries automatically cut in. Separate compartments for hot swapping batteries.Its rugged design allows for field use, and runs for up to 10 hours on two hot-swappable 9-volt batteries. The unit has XLR out with a ¼” return to headphones and four ¼” headphone outputs, along with 3.5 mm TRRS which provides 2-way IFB audio from your cell phone or notebook.JK Audio RMx4 Features:Four low noise, high headroom XLR mic jacksMic/Line Switches on channels 3 & 4Individually switchable 48v Phantom Power120 Hz Low Cut FilterMaster XLR output 20 Hz – 20 kHzFour ¼” headphone jacks with individual sourceselector and level controls.¼” Headphone Cue InputPhone headset interface with 3.5 mm TRRS plug3.5 mm Send and Receive jacksLED VU MeterHot swappable dual 9 volt batteries100-240 VAC External AC power supplyCompliance tested for North America, CE markets, andAustralia.Made in USAJK Audio RMx4 Specifications:Inputs:Microphones (4): Female XLR - mic level = 2k ohm (-25 dBu nom.) Channel 3 & 4 have -40 dB Mic/Line pad switch Line level = 50k ohms, +20 dBu max.Phantom Power: 48 VDC with 6.8k ohm supply resistanceLine Input: 3.5mm Stereo line input, 20k ohms -10 dBu nom.Headphone Cue In: 1/4" mono, 20k ohms, -10 dBu nom.Outputs:Balanced Out: Male XLR 50 ohms +16 dBu max. 20 Hz - 20 kHz +/-1dB, 0.04% THD @ +16 dBuLine Out: 3.5mm Stereo line output, 100 ohms -10 dBu nom.Headphones (4): 1/4" Stereo 8 ohms, 1/3 watt per channelPower: 120-240 VAC, 50-60 Hz external power supply ortwo 9 VDC batteriesSize: 9.5" x 8" x 3" (24 x 20 x 8 cm)Weight: 3.6 pounds (1.6 kg) JK Audio RMx4 Field Mixer.
Product Specifications
General | |
|---|---|
Gender | female |
Material | mode |
Size | Extra Small |
Brand | JK Audio |
Delivery, Returns & Refunds
Delivery
Sellers offer a range of delivery options, so you can choose the one that’s most convenient for you. Many sellers offer free delivery. You can always find the postage cost and estimated delivery date in a seller’s listing. You'll then be able to see a full list of delivery options during checkout. These can include: Express delivery, Standard delivery, Economy delivery, Click & Collect, Free local collection from seller.
Returns
Your options for returning an item vary depending on what you want to return, why you want to return it, and the seller's return policy. If the item is damaged or doesn't match the listing description, you can return it even if the seller's returns policy says they don't accept returns. If you've changed your mind and no longer want an item, you can still request a return, but the seller doesn't have to accept it. If the buyer changes their mind about a purchase and wants to return an item, they may need to pay return postage costs, depending on the seller's return policy. Sellers can provide a return postage address and additional return postage information for the buyer. Sellers pay for return postage if there's a problem with the item. For example, if the item doesn't match the listing description, is damaged or defective or is counterfeit. By law, customers in the European Union also have the right to cancel the purchase of an item within 14 days beginning from the day you receive, or a third party indicated by you (other than the carrier) receives, the last good ordered by you (if delivered separately). This applies to all products except for digital items (e.g. Digital Music) that are provided immediately to you with your acknowledgment, and other items such as video, DVD, audio, video games, Sex and Sensuality products and software products where the item has been unsealed.
Refunds
Sellers have to offer a refund for certain items only if they are faulty, such as: Personalized items and custom-made items, Perishable items, Newspapers and magazines, Unwrapped CDs DVDs and computer software. If you used your PayPal balance or bank account to fund the original payment, the refunded money will go back to your PayPal account balance. If you used a credit or debit card to fund the original payment, the refunded money will go back to your card. The seller will effect the refund within three working days but it may take up to 30 days for Paypal to process the transfer. For payments funded partially by a card and partially by your balance/bank, the money taken from your card will go back to your card and the remainder will return to your PayPal balance.